I've set the same password in the server config file and the vcmp.ini file in gus and have also put the ip in vcmp.ini as 127.0.0.1
The port in both the server and the vcmp are set to 5200.
I've done everything right but cant connect gus to my server.
VCMP General Use Scripts v9.00 - Loaded/Started
VCMP General Use Scripts v9.00 - Attempting to Connect
Connecting to 127.0.0.1:5200 (123)...
Connecting to 127.0.0.1:5200 (123)...
Connecting to 127.0.0.1:5200 (123)...
Connecting to 127.0.0.1:5200 (123)...
Connecting to 127.0.0.1:5200 (123)...
Connecting to 127.0.0.1:5200 (123)...
Connecting to 127.0.0.1:5200 (123)...
Connecting to 127.0.0.1:5200 (123)...
It keeps going.
This is my vcmp.ini file :
[MAIN]
IP=127.0.0.1
RPORT=5135
CPORT=5200
PASSWORD=123
Are you sure you have the right DLL for your server,
If you're using the new server (RC2) update your DLL (rcondll.dll) with the one you can download from the main site.